Automatically close the door of your hen house 10mn after dark. Opens at sunrise.
only 8 screws to put!
This is our most upscale version, fully weatherproof with an aluminum structure, resin panels and stainless steel hardware. The frame is complete, with lower and upper stops.
henhouse is in the sun from time to time: requires at least 30 hours of
direct sun every two months to recharge its battery, an average of 30
minutes of sunshine a day. (No orientation North, nor just behind a tree or a house that hides the sun all day).
Optional below: the solar cell can be deported with a wire more or less long in case your door is always in the shade.
Principle of operation:
In the morning, when the light is sufficient, a geared motor wraps the braid so that the door opens and releases the hens.
In the evening, 10 minutes after dark (the time needed to make sure
that all the hens have returned) the gearmotor automatically releases
the braid until the henhouse door is closed.
4 AA size rechargeable batteries (included) allow to store the energy of the sun for a 2 months autonomy without sun.
- The automatic guillotine door as delivered, ready to be installed:
- Detail of the aluminum profiles used:
A factory programmed closing module (rechargeable batteries included) assembled and ready to install.
The 8 screws required for assembly.
A color manual
Dimensions of the opening 24 x 33 cm approximately (width x height)
Outside dimensions: approximately 28 x 69 cm (width x height)
Size of the cut-out to be made in the henhouse: about 22 cm wide and 34 cm high
This product has been designed and manufactured by us in France in the jura.
Aluminum profile door guides.
Door panel body: compact laminate 4mm thick (resin), very resistant and insulating.
Rugged and waterproof recyclable ABS housing (IP 54).
Solar cell and high capacity battery for total autonomy.
Brightness detection using the solar cell for automatic adjustment of
the time of opening and closing according to the actual sunrise and
Geared motor with all its hardened steel gears for a very long life.
Cord in braid with a resistance of 68kg.
A touch key is used to start a test cycle (closing and opening).
The advantage of a touch key is the perfect seal, unlike a switch.
The aluminum braid coil is on the outside of the case to prevent moisture from entering.
The remote solar cell option:
option now comes with adhesive scratch pads to attach the solar cell,
and collars with their brackets to properly secure the power cord.
A cable gland ensures the tightness.
Estimated shipping time : 9 days.
Remote solar panel: